• mhard - D4 - Long Center Bevel

    mhard - D4 - Long Center Bevel

2pt mhard - D4 - Long Center Bevel - meter pieces - 390HV/640HV

Article number Product description Higher height mm Base thickness mm Diameter Rule mm TPI (teeth per inch) Chamfer
01045M Cutting rule 23.80 X 0.71mm D4, 52°, 390/640HV, mhard, with edge hardening, in meterpiecesCutting rule 23.80 X 0.71mm 23.8023.80 0.710.71 without teeth Long center bevel

2Pkt. mhard - D4 - doppelseitige Facette - coils - 390HV/640HV

Article number Product description Higher height mm Base thickness mm Diameter Rule mm TPI (teeth per inch) Chamfer
10436 Cutting rule 23,80x0,70mm D4, 52°, 390/640HV, mhard, edge hardened, coilsCutting rule 23,80x0,70mm 23.8023.80 0.710.71 without teeth Long center bevel
01045 Cutting rule 23.80 X 0.71mm D4, 52°, 390/640HV, mhard, with edge hardening, on coilsCutting rule 23.80 X 0.71mm 23.8023.80 0.710.71 without teeth Long center bevel

3Pkt. mhard - D4 - Long Center Bevel - meter pieces - 340HV/640HV

Article number Product description Higher height mm Base thickness mm Diameter Rule mm TPI (teeth per inch) Chamfer
01073M Cutting rule 23.80x1.05mm D4, 52°, 340/640HV, mhard, with edge hardening, in meterpiecesCutting rule 23.80x1.05mm 23.8023.80 1.051.05 without teeth Long center bevel

3Pkt. mhard - D4 - Long Center Bevel - coils - 340HV/640HV

Article number Product description Higher height mm Base thickness mm Diameter Rule mm TPI (teeth per inch) Chamfer
01073 Cutting rule 23.80x1.05mm D4, 52°, 340/640HV, mhard, with edge hardening, on coilsCutting rule 23.80x1.05mm 23.8023.80 1.051.05 without teeth Long center bevel
10453 Schneidlinie 1,05 X 23.80 MM marbach mhard, LCB, 52° S, 340HV/640HV, CW coilsSchneidlinie 1,05 X 23.80 MM 23.8023.80 1.051.05 without teeth Long center bevel

4pt. mhard - D4 - Long Center Bevel - Coils

Article number Product description Higher height mm Base thickness mm Diameter Rule mm TPI (teeth per inch) Chamfer
01123 Cutting Rule 23,80x1,42mm marbach mhard, LBC, 52° S, 340HV/640HV, ACW coilsCutting Rule 23,80x1,42mm 23.8023.80 1.421.42 without teeth Long center bevel