• Cutting Rules

    Cutting Rules

1.5pt D - Center Bevel - meter pieces

Article number Product description Higher height mm Base thickness mm Diameter Rule mm TPI (teeth per inch) Chamfer
00829M Cutting rule 12.00x0.40mm D, H3, shaped, in meterpiecesCutting rule 12.00x0.40mm 12.0012.00 0.400.40 without teeth Center bevel
00831M Cutting rule 12.00x0.40mm D, H2, TDF, shaped, in meterpiecesCutting rule 12.00x0.40mm 12.0012.00 0.400.40 without teeth Center bevel
00833M Cutting rule 12.00x0.50mm D, H2, TDF, shaped, in meterpiecesCutting rule 12.00x0.50mm 12.0012.00 0.500.50 without teeth Center bevel
00836M Cutting rule 12.00x0.50mm D, H2, TDF Special 60W, shaved, in meterpiecesCutting rule 12.00x0.50mm 12.0012.00 0.500.50 without teeth Center bevel

1.5pt D - Center Bevel - coils

Article number Product description Higher height mm Base thickness mm Diameter Rule mm TPI (teeth per inch) Chamfer
00833 Cutting rule 12.00x0.50mm D, H2, TDF, shaped, opposite on coilsCutting rule 12.00x0.50mm 12.0012.00 0.500.50 without teeth Center bevel
00836 Cutting rule 12.00x0.50mm D, H2, TDF Special 60W, shaved, on coilsCutting rule 12.00x0.50mm 12.0012.00 0.500.50 without teeth Center bevel
04264 Cutting rule 12.00x0.50mm D, H2, TDF, ACW shaped, on coilsCutting rule 12.00x0.50mm 12.0012.00 0.500.50 without teeth Center bevel
04265 Cutting rule 12.00x0.50mm D, H2, TDF on coilsCutting rule 12.00x0.50mm 12.0012.00 0.500.50 without teeth Center bevel

2pt D - Center Bevel - meter pieces

Article number Product description Higher height mm Base thickness mm Diameter Rule mm TPI (teeth per inch) Chamfer
01627M Cutting rule 23.10x0.71mm D, H3x shaved, in meterpiecesCutting rule 23.10x0.71mm 23.1023.10 0.710.71 without teeth Center bevel
00958M Cutting rule 23.50x0.71mm D, HF, DC-Dieflex, in meterpiecesCutting rule 23.50x0.71mm 23.5023.50 0.710.71 without teeth Center bevel
01116M Cutting rule 23.60x0.71mm D, HF, DC-Dieflex, in meterpiecesCutting rule 23.60x0.71mm 23.6023.60 0.710.71 without teeth Center bevel
01632M Cutting rule 23.60x0.71mm D, H3x, in meterpiecesCutting rule 23.60x0.71mm 23.6023.60 0.710.71 without teeth Center bevel
01633M Cutting rule 23.65x0.71mm D, H3x shaved, in meterpiecesCutting rule 23.65x0.71mm 23.6523.65 0.710.71 without teeth Center bevel
01020M Cutting rule 23.80x0.71mm D, VC-Vertex, in meterpiecesCutting rule 23.80x0.71mm 23.8023.80 0.710.71 without teeth Center bevel
09094M Cutting rule 23.80x0.71mm D, DC-Dieflex, G12, in meterpiecesCutting rule 23.80x0.71mm 23.8023.80 0.710.71 without teeth Center bevel
09096M Cutting rule 23.80x0.71mm D, DC-Dieflex, G12, in meterpiecesCutting rule 23.80x0.71mm 23.8023.80 0.710.71 Center bevel

2pt D - Center Bevel - coils

Article number Product description Higher height mm Base thickness mm Diameter Rule mm TPI (teeth per inch) Chamfer
01197 Cutting Rule 0.71 X 22.90 MM CB, H2/3 ground in coils of 100mCutting Rule 0.71 X 22.90 MM 22.9022.90 0.710.71 without teeth Center bevel
02535 Cutting Rule 23,20x0,71mm H3, D, 52°, ground in coils 100m AnticlockwiseCutting Rule 23,20x0,71mm 23.2023.20 0.710.71 without teeth Center bevel
01626 Cutting rule 23.00x0.71mm D, H2/3, shaved, on coilsCutting rule 23.00x0.71mm 23.0023.00 0.710.71 without teeth Center bevel
01628 Cutting rule 23.20x0.71mm D, H3x, shaved, on coilsCutting rule 23.20x0.71mm 23.2023.20 0.710.71 without teeth Center bevel
01630 Cutting rule 23.40x0.71mm D, H3x, shaved, on coilsCutting rule 23.40x0.71mm 23.4023.40 0.710.71 without teeth Center bevel
01631 Cutting rule 23.50x0.71mm D, H3x, shaved, on coilsCutting rule 23.50x0.71mm 23.5023.50 0.710.71 without teeth Center bevel
01632 cutting rule 23.60x0,71mm d, hardness 3x shaved 100m-coilscutting rule 23.60x0,71mm 23.6023.60 0.710.71 without teeth Center bevel
01633 Cutting rule 23.65x0.71mm D, H3x, shaped, on coilsCutting rule 23.65x0.71mm 23.6523.65 0.710.71 without teeth Center bevel
00976 Cutting rule 23.80x0.71mm D, Universal Supreme, on coilsCutting rule 23.80x0.71mm 23.8023.80 0.710.71 without teeth Center bevel
01020 Cutting rule 23.80x0.71mm D, VC-Vertex, on coilsCutting rule 23.80x0.71mm 23.8023.80 0.710.71 without teeth Center bevel
01027 Cutting rule 23.80x0.71mm D, 42°, DC-Dieflex, on coilsCutting rule 23.80x0.71mm 23.8023.80 0.710.71 without teeth Center bevel
01097 Cutting rule 23.80x0.71mm D, 42°, Die Hard Extreme, anticlockwise, on coilsCutting rule 23.80x0.71mm 23.8023.80 0.710.71 without teeth Center bevel
01210 Cutting rule 23.80x0.71mm D, H2, TDF Special 60W, shaved, ACW on coilsCutting rule 23.80x0.71mm 23.8023.80 0.710.71 without teeth Center bevel
01213 Cutting rule 23.80x0.71mm D, 42°, H2, TDF Special 60W, shaved, on coilsCutting rule 23.80x0.71mm 23.8023.80 0.710.71 without teeth Center bevel
02503 Cutting rule 23.80x0.71mm D, DC-Dieflex on coilsCutting rule 23.80x0.71mm 23.8023.80 0.710.71 Center bevel
08934 Cutting rule 23.80x0.71mm D, Universal, Tinit, on coilsCutting rule 23.80x0.71mm 23.8023.80 0.710.71 without teeth Center bevel
09090 Cutting rule 23.80x0.71mm D, DC-Dieflex, opposite, on coilsCutting rule 23.80x0.71mm 23.8023.80 0.710.71 without teeth Center bevel
09091 Cutting rule 23.80x0.71mm D, 42°, DC-Dieflex, G12, opposite, on coilsCutting rule 23.80x0.71mm 23.8023.80 0.710.71 without teeth Center bevel
09092 Cutting rule 23.80x0.71mm D, 42°, DC-Dieflex, ultra, opposite, on coilsCutting rule 23.80x0.71mm 23.8023.80 0.710.71 without teeth Center bevel
09095 Cutting rule 23.80x0.71mm D, 42°, DC-Dieflex, opposite, on coilsCutting rule 23.80x0.71mm 23.8023.80 0.710.71 without teeth Center bevel
09096 Cutting rule 23.80x0.71mm D, DC-Dieflex, G12, opposite, on coilsCutting rule 23.80x0.71mm 23.8023.80 0.710.71 without teeth Center bevel
01029 Cutting rule 23.80x0.71mm D, XC-Dieflex hard, 52°, center bevel, on coilsCutting rule 23.80x0.71mm 23.8023.80 0.710.71 Center bevel
02503S Cutting rule 23.80x0.71mm D, DC-Dieflex on coils Ø470Cutting rule 23.80x0.71mm 23.8023.80 0.710.71 Center bevel
09098 Cutting rule 24,70x0,71mm D, DC-Dieflex, G12, opposite, on coilsCutting rule 24,70x0,71mm 24.7024.70 0.710.71 Center bevel

2pt D4 - Long Center Bevel - meter pieces

Article number Product description Higher height mm Base thickness mm Diameter Rule mm TPI (teeth per inch) Chamfer
01017M Cutting rule 23.80x0.71mm D4, DF-Dieflex, in meterpiecesCutting rule 23.80x0.71mm 23.8023.80 0.710.71 without teeth Long center bevel
09137M Cutting rule 23.80x0.71mm D4, DF-Dieflex, G12, in meterpiecesCutting rule 23.80x0.71mm 23.8023.80 0.710.71 Long center bevel

2pt D4 - Long Center Bevel - coils

Article number Product description Higher height mm Base thickness mm Diameter Rule mm TPI (teeth per inch) Chamfer
04262 Cutting rule 22.80x0.71mm D4, H3X on coilsCutting rule 22.80x0.71mm 22.8022.80 0.710.71 Long center bevel
04261 Cutting rule 23.30x0.71mm D4, H3X on coilsCutting rule 23.30x0.71mm 23.3023.30 0.710.71 Long center bevel
02520 Cutting rule 23.50x0.71mm D4, DF Dieflex, on coilsCutting rule 23.50x0.71mm 23.5023.50 0.710.71 Long center bevel
02525 Cutting rule 23.60x0.71mm D4, DF Dieflex, on coilsCutting rule 23.60x0.71mm 23.6023.60 0.710.71 Long center bevel
01048 Cutting rule 23.80x0.71mm D4, H4, TDF Special 60W, on coilsCutting rule 23.80x0.71mm 23.8023.80 0.710.71 without teeth Long center bevel
09099 Cutting rule 23.80x0.71mm D4, VF-Vertex, opposite, on coilsCutting rule 23.80x0.71mm 23.8023.80 0.710.71 Long center bevel
09103 Cutting rule 23.80x0.71mm D4, 42°, DHF-Diehard 700XD, opposite, on coilsCutting rule 23.80x0.71mm 23.8023.80 0.710.71 Long center bevel
09124 Cutting rule 23.80x0.71mm D4, 42°, DF-Dieflex, G12, opposite, on coilsCutting rule 23.80x0.71mm 23.8023.80 0.710.71 Long center bevel
09137 Cutting rule 23.80x0.71mm D4, DF-Dieflex, G12, opposite, on coilsCutting rule 23.80x0.71mm 23.8023.80 0.710.71 Long center bevel
09195 Cutting rule 23.80x0.71mm D4, XF-Dieflex, G12, opposite, on coilsCutting rule 23.80x0.71mm 23.8023.80 0.710.71 Long center bevel
01017S Cutting rule 23.80x0.71mm D4, DF-Dieflex, on coils Ø470Cutting rule 23.80x0.71mm 23.8023.80 0.710.71 without teeth Long center bevel

2pt E - Side Bevel - coil

Article number Product description Higher height mm Base thickness mm Diameter Rule mm TPI (teeth per inch) Chamfer
01008 Cutting rule 23.80x0.71mm E, H2, shaved, on coilsCutting rule 23.80x0.71mm 23.8023.80 0.710.71 without teeth Side bevel
04020 Cutting rule 23.80x0.71mm E, H3x, one side bevel, on coilsCutting rule 23.80x0.71mm 23.8023.80 0.710.71 without teeth Side bevel
08920 Cutting rule 23.80x0.71mm E, DS-Dieflex, on coilsCutting rule 23.80x0.71mm 23.8023.80 0.710.71 Side bevel
09101 Cutting rule 23.80x1.05mm E, DS-Dieflex, G12, opposite, ACWCutting rule 23.80x1.05mm 23.8023.80 1.051.05 Side bevel

2pt E4 - Long Side Bevel - Meterware

Article number Product description Higher height mm Base thickness mm Diameter Rule mm TPI (teeth per inch) Chamfer
08921 Cutting rule 23.80x0.71mm E4, DSF-Dieflex, in coilsCutting rule 23.80x0.71mm 23.8023.80 0.710.71 Long side bevel

2pt E4 - Long Side Bevel - coils

Article number Product description Higher height mm Base thickness mm Diameter Rule mm TPI (teeth per inch) Chamfer
02502M Cutting rule 23.80x0.71mm E4, Uni 60 SFDB, in meterpiecesCutting rule 23.80x0.71mm 23.8023.80 0.710.71 Long side bevel

3pt D - Center Bevel - meter pieces

Article number Product description Higher height mm Base thickness mm Diameter Rule mm TPI (teeth per inch) Chamfer
01071M Cutting rule 23.80x1.05mm D, DC-Dieflex, in meterpiecesCutting rule 23.80x1.05mm 23.8023.80 1.051.05 without teeth Center bevel
04024M Cutting rule 23.80x1.05mm D, H 3x, shaved, in meterpiecesCutting rule 23.80x1.05mm 23.8023.80 1.051.05 without teeth Center bevel
08820M Cutting rule 23.80x1.05mm D, VC-Vertex, in meterpiecesCutting rule 23.80x1.05mm 23.8023.80 1.051.05 without teeth Center bevel
08818M Cutting rule 30.00x1.05mm D, XC-Dieflex, in meterpiecesCutting rule 30.00x1.05mm 30.0030.00 1.051.05 Center bevel
02512M Cutting rule 40.00x1.05mm D, Dieflex-DC, in meterpiecesCutting rule 40.00x1.05mm 40.0040.00 1.051.05 Center bevel
08819M Cutting rule 40.00x1.05mm D, XC-Dieflex, in meterpiecesCutting rule 40.00x1.05mm 40.0040.00 1.051.05 Center bevel
02513M Cutting rule 50.00x1.05mm D, DC-Dieflex, in meterpiecesCutting rule 50.00x1.05mm 50.0050.00 1.051.05 Center bevel
02514M Cutting rule 50.00x1.05mm D, XC-Dieflex-Hard, in meterpiecesCutting rule 50.00x1.05mm 50.0050.00 1.051.05 Center bevel

3pt - D - Center Bevel - coils

Article number Product description Higher height mm Base thickness mm Diameter Rule mm TPI (teeth per inch) Chamfer
02512 CUTTING RULE 1.05 X 40.00 MM D, H2, TDF shaved, ACW in coilsCUTTING RULE 1.05 X 40.00 MM 40.0040.00 1.051.05 without teeth Center bevel
02514 CUTTING RULE 1.05 X 50.00 MM D, H2, TDF shaved, ACW in coilsCUTTING RULE 1.05 X 50.00 MM 50.0050.00 1.051.05 without teeth Center bevel
02508 Cutting rule 23.80x1.05mm D, 42°, Diehard 700XD, opposite ???? OP ??? on coilsCutting rule 23.80x1.05mm 23.8023.80 1.051.05 Center bevel
09093 Cutting rule 23.80x1.05mm D, 42°, DC-Dieflex, opposite, on coilsCutting rule 23.80x1.05mm 23.8023.80 0.710.71 without teeth Center bevel
09097 Cutting rule 23.80x1.05mm D, 42°, DC-Dieflex, G12, opposite, on coilsCutting rule 23.80x1.05mm 23.8023.80 1.051.05 Center bevel
09160 Cutting rule 23.80x1.05mm D, DC-Dieflex, opposite, on coilsCutting rule 23.80x1.05mm 23.8023.80 1.051.05 Center bevel
01038 Cutting rule 23.80x1.05mm D, DC-Dieflex, center bevel, coiling counterclockwise, on coilsCutting rule 23.80x1.05mm 23.8023.80 1.051.05 Center bevel
000011 Cutting rule 30.00x1.05mm D, TDF V, on coilsCutting rule 30.00x1.05mm 30.0030.00 1.051.05 without teeth Center bevel
08818 Cutting rule 30.00x1.05mm D, XC-Dieflex, on coilCutting rule 30.00x1.05mm 30.0030.00 1.051.05 Center bevel
000051 Cutting rule 50.00x1.05mm D, TDF V, H2X on coils, ACWCutting rule 50.00x1.05mm 50.0050.00 1.051.05 without teeth Center bevel
00811 Cutting rule 8.00x1.05mm D, H2, shaved, on coilsCutting rule 8.00x1.05mm 8.008.00 1.051.05 without teeth Center bevel

3pt D4 - Long Center Bevel - meter pieces

Article number Product description Higher height mm Base thickness mm Diameter Rule mm TPI (teeth per inch) Chamfer
08934M Cutting rule 30.00x1.05mm D4, XF-Dieflex, in meterpiecesCutting rule 30.00x1.05mm 30.0030.00 1.051.05 without teeth Long center bevel
08821M Cutting rule 40.00x1.05mm D4, XF-Dieflex, G12, in meterpiecesCutting rule 40.00x1.05mm 40.0040.00 1.051.05 without teeth Long center bevel
08899M Cutting rule 50.00x1.05mm D4, XF-Dieflex, in meterpiecesCutting rule 50.00x1.05mm 50.0050.00 1.051.05 without teeth Long center bevel

3pt D4 - Long Center Bevel - coils

Article number Product description Higher height mm Base thickness mm Diameter Rule mm TPI (teeth per inch) Chamfer
01065 Cutting rule 23.80x1.05mm D4, H3x, shaved, on coilsCutting rule 23.80x1.05mm 23.8023.80 1.051.05 without teeth Long center bevel
01226 Cutting rule 23.80x1.05mm D4, H4, shaved, on coilsCutting rule 23.80x1.05mm 23.8023.80 1.051.05 without teeth Long center bevel
09089 Cutting rule 23.80x1.05mm D4, XF-Dieflex, 700XD, mpower, opposite on coilsCutting rule 23.80x1.05mm 23.8023.80 1.051.05 without teeth Long center bevel
09102 Cutting rule 23.80x1.05mm D4, 42°, DHF-Diehard 700XD, opposite, on coilsCutting rule 23.80x1.05mm 23.8023.80 1.051.05 Long center bevel
09159 Cutting rule 23.80x1.05mm D4, 42°, DF-Dieflex, G12, opposite, on coilsCutting rule 23.80x1.05mm 23.8023.80 1.051.05 Long center bevel
09169 Cutting rule 23.80x1.05mm D4, 42°, DHF-Diehard 700XD, on coilsCutting rule 23.80x1.05mm 23.8023.80 1.051.05 Long center bevel
01036 Cutting rule 23.80x1.05mm D4, DF-Dieflex,facet bevel, CFDB, on coilsCutting rule 23.80x1.05mm 23.8023.80 1.051.05 Long center bevel
09085 Cutting rule 30.00x1.05mm D4, XF-Dieflex, G12, opposite, on coilsCutting rule 30.00x1.05mm 30.0030.00 1.051.05 without teeth Long center bevel
000021 Cutting rule 30.00x1.05mm D4, TDF V, shaved, ACW, in coilsCutting rule 30.00x1.05mm 30.0030.00 1.051.05 without teeth Long center bevel
09086 Cutting rule 40.00x1.05mm D4, XF-Dieflex, G12, opposite, on coilsCutting rule 40.00x1.05mm 40.0040.00 1.051.05 without teeth Long center bevel
000041 Cutting rule 40.00x1.05mm D4, TDF V, ground on coilsCutting rule 40.00x1.05mm 40.0040.00 1.051.05 without teeth Long center bevel
09087 Cutting rule 50.00x1.05mm D4, XF-Dieflex, G12, opposite, on coilsCutting rule 50.00x1.05mm 50.0050.00 1.051.05 without teeth Long center bevel
000061 Cutting rule 50.00x1.05mm D4, TDF V, on coils ACWCutting rule 50.00x1.05mm 50.0050.00 1.051.05 without teeth Long center bevel
09088 Cutting rule 80.00x1.05mm D4, XF-Dieflex, G12, opposite, on coilsCutting rule 80.00x1.05mm 80.0080.00 1.051.05 without teeth Long center bevel

3pt E4 - Long Side Bevel - meter pieces

Article number Product description Higher height mm Base thickness mm Diameter Rule mm TPI (teeth per inch) Chamfer
01139M Cutting rule 23.80x1.05mm E4, DB, H-75, in meterpiecesCutting rule 23.80x1.05mm 23.8023.80 1.051.05 without teeth Long side bevel
02506M Cutting rule 23.80x1.05mm E4, Uni 60 SFDB, in meterpiecesCutting rule 23.80x1.05mm 23.8023.80 1.051.05 Long side bevel
08897M Cutting rule 30.00x1.05mm E4, XSF-Dieflex, in meterpiecesCutting rule 30.00x1.05mm 30.0030.00 1.051.05 Long side bevel
08898M Cutting rule 50.00x1.05mm E4, XSF-Dieflex, in meterpiecesCutting rule 50.00x1.05mm 50.0050.00 1.051.05 Long side bevel

3pt E4 - Long Side Bevel - coils

Article number Product description Higher height mm Base thickness mm Diameter Rule mm TPI (teeth per inch) Chamfer
04259 Cutting rule 23.80x1.05mm E4, H3x on coilsCutting rule 23.80x1.05mm 23.8023.80 1.051.05 without teeth Long side bevel
02506 Schneidlinie 23.80x1.05mm E4, DSF-Dieflex, in coilsSchneidlinie 23.80x1.05mm 23.8023.80 1.051.05 Long side bevel

4pt. D - Center Bevel - meter pieces

Article number Product description Higher height mm Base thickness mm Diameter Rule mm TPI (teeth per inch) Chamfer
08939M Cutting rule 40.00x1.42mm D, XF-Dieflex, in meterpiecesCutting rule 40.00x1.42mm 40.0040.00 1.421.42 without teeth Center bevel
02575M Cutting rule 80.00x1.42mm D, Universal 60, shaved, in 1.5m-piecesCutting rule 80.00x1.42mm 80.0080.00 1.421.42 without teeth Center bevel
08431M Rot.cutting rule 25.40x1.42mm D, straight not notched, Euro-Cut, 8tpi, in meterpiecesRot.cutting rule 25.40x1.42mm 25.4025.40 1.421.42 88 Center bevel

4pt D - Center Bevel - coils

Article number Product description Higher height mm Base thickness mm Diameter Rule mm TPI (teeth per inch) Chamfer
08939 Cutting rule 40.00x1.42mm D, XF-Dieflex, on coilsCutting rule 40.00x1.42mm 40.0040.00 1.421.42 without teeth Center bevel
08566 Rot.cutting rule 23.40x1.42mm D, straight not notched, Euro-Cut, 8tpi on coilsRot.cutting rule 23.40x1.42mm 23.4023.40 1.421.42 88 Center bevel
08313 Rot.cutting rule 23.80x1.42mm D, straight not notched, Clean-Cut, 8tpi, on coilsRot.cutting rule 23.80x1.42mm 23.8023.80 1.421.42 88 Center bevel
08463 Rot.cutting rule 23.80x1.42mm D, curved notched, Ø 645mm, Euro-Cut, 8tpi, on coilsRot.cutting rule 23.80x1.42mm 23.8023.80 1.421.42 645645 88 Center bevel
08533 Rot.cutting rule 23.80x1.42mm D, straight not notched, Euro-Cut, 8tpi, mhard-r, on coilsRot.cutting rule 23.80x1.42mm 23.8023.80 1.421.42 88 Center bevel
08555 Rot.cutting rule 23.80x1.42mm D, curved notched, Ø 280mm, serrated, 12tpi, on coilsRot.cutting rule 23.80x1.42mm 23.8023.80 1.421.42 270270 1212 Center bevel
08609 Rot.cutting rule 23.80x1.42mm D, curved notched, Ø 366mm, serrated, 12tpi, on coilsRot.cutting rule 23.80x1.42mm 23.8023.80 1.421.42 366366 1212 Center bevel
08610 Rot.cutting rule 23.80x1.42mm D, curved not notched, Ø 487mm, serrated, 12tpi, on coilsRot.cutting rule 23.80x1.42mm 23.8023.80 1.421.42 487487 1212 Center bevel
08758 Rot.cutting rule 23.80x1.42mm D, curved notched, Ø 407mm, serrated, 12tpi, on coilsRot.cutting rule 23.80x1.42mm 23.8023.80 1.421.42 410410 1212 Center bevel
08907 Rot.cutting rule 23.80x1.42mm D, straight not notched, Clean-Cut, 13tpi, on coilsRot.cutting rule 23.80x1.42mm 23.8023.80 1.421.42 88 Center bevel
08281 Rot.cutting rule 23.80x1.42mm D, straight notched, serrated, 12tpi, on coilsRot.cutting rule 23.80x1.42mm 23.8023.80 1.421.42 1212 Center bevel
08243 Rot.cutting rule 24.60x1.42mm D, straight not notched, Clean-Cut, 8tpi, on coilsRot.cutting rule 24.60x1.42mm 24.6424.64 1.421.42 88 Center bevel
08247 Rot.cutting rule 24.60x1.42mm D, curved notched, Ø 487mm, serrated, 12tpi, on coilsRot.cutting rule 24.60x1.42mm 24.6024.60 1.421.42 487487 1212 Center bevel
08561 Rot.cutting rule 24.60x1.42mm D, curved not notched, Ø 487mm, Euro-Cut, 8tpi, on coilsRot.cutting rule 24.60x1.42mm 24.6024.60 1.421.42 487487 88 Center bevel
08612 Rot.cutting rule 24.60x1.42mm D, curved not notched, Ø 487mm, serrated, 12tpi, on coilsRot.cutting rule 24.60x1.42mm 24.6024.60 1.421.42 487487 1212 Center bevel
08770 Rot.cutting rule 24.60x1.42mm D, curved not notched, Ø 381mm, Euro-Cut, 8tpi, on coilsRot.cutting rule 24.60x1.42mm 24.6024.60 1.421.42 381381 88 Center bevel
08910 Rot.cutting rule 24.60x1.42mm D, curved notched, Ø 407mm, Euro-Cut, 8tpi, on coilsRot.cutting rule 24.60x1.42mm 24.6024.60 1.421.42 410410 88 Center bevel
08562 Rot.cutting rule 25.00x1.42mm D, curved not notched, Ø 487mm, Euro-Cut, 8tpi, on coilsRot.cutting rule 25.00x1.42mm 25.0025.00 1.421.42 487487 88 Center bevel
08616 Rot.cutting rule 25.00x1.42mm D, curved notched, Ø 487mm, Euro-Cut, 8tpi, on coilsRot.cutting rule 25.00x1.42mm 25.0025.00 1.421.42 487487 88
08614 Rot.cutting rule 25.00x1.42mm D, curved not notched, Ø 487mm, 12tpi, on coilsRot.cutting rule 25.00x1.42mm 25.0025.00 1.421.42 487487 1212
08629 Rot.cutting rule 25.00x1.42mm D, straight not notched, 12tpi, on coilsRot.cutting rule 25.00x1.42mm 25.0025.00 1.421.42 1212
08569 Rot.cutting rule 25.10x1.42mm D, straight not notched, Euro-Cut, 8tpi, on coilsRot.cutting rule 25.10x1.42mm 25.1025.10 1.421.42 88 Center bevel
08227 Rot.cutting rule 25.40x1.42mm D, curved notched, Ø 487mm, serrated, 12tpi, on coilsRot.cutting rule 25.40x1.42mm 25.4025.40 1.421.42 487487 1212 Center bevel
08228 Rot.cutting rule 25.40x1.42mm D, straight not notched, serrated, 12tpi, on coilsRot.cutting rule 25.40x1.42mm 25.4025.40 1.421.42 1212 Center bevel
08289 Rot.cutting rule 25.40x1.42mm D, straight notched, serrated, 12tpi, on coilsRot.cutting rule 25.40x1.42mm 25.4025.40 1.421.42 1212 Center bevel
08430 Rot.cutting rule 25.40x1.42mm D, curved notched, Ø 487mm, Euro-Cut, 8tpi, on coilsRot.cutting rule 25.40x1.42mm 25.4025.40 1.421.42 487487 88 Center bevel
08431 Rot.cutting rule 25.40x1.42mm D, straight not notched, Euro-Cut, 8tpi, on coilsRot.cutting rule 25.40x1.42mm 25.4025.40 1.421.42 88 Center bevel
08462 Rot.cutting rule 25.40x1.42mm D, curved notched, Ø 270mm, Euro-Cut, 8tpi, on coilsRot.cutting rule 25.40x1.42mm 25.4025.40 1.421.42 270270 88 Center bevel
08464 Rot.cutting rule 25.40x1.42mm D, curved notched, Ø 645mm, Euro-Cut, 8tpi, on coilsRot.cutting rule 25.40x1.42mm 25.4025.40 1.421.42 645645 88 Center bevel
08564 Rot.cutting rule 25.40x1.42mm D, curved not notched, Ø 487mm, Euro-Cut, 8tpi, on coilsRot.cutting rule 25.40x1.42mm 25.4025.40 1.421.42 487487 88 Center bevel
08618 Rot.cutting rule 25.40x1.42mm D, curved not notched, Ø 360mm, 12tpi, on coilsRot.cutting rule 25.40x1.42mm 25.4025.40 1.421.42 360360 1212 Center bevel
08622 Rot.cutting rule 25.40x1.42mm D, curved not notched, Ø 487mm, 12tpi, ACW on coilsRot.cutting rule 25.40x1.42mm 25.4025.40 1.421.42 487487 1212 Center bevel
08661 Rot.cutting rule 25.40x1.42mm D, curved not notched, Ø 410mm, serrated, 12tpi, on coilsRot.cutting rule 25.40x1.42mm 25.4025.40 1.421.42 410410 1212 Center bevel
08684 Rot.cutting rule 25.40x1.42mm D, straight notched, Euro-Cut, 8tpi, on coilsRot.cutting rule 25.40x1.42mm 25.4025.40 1.421.42 88 Center bevel
08779 Rot.cutting rule 25.40x1.42mm D, curved notched, Ø 360mm, serrated, 12tpi, on coilsRot.cutting rule 25.40x1.42mm 25.4025.40 1.421.42 360360 1212 Center bevel
08926 Rot.cutting rule 25.40x1.42mm D, curved notched, Ø 350mm, serrated, 12tpi, on coilsRot.cutting rule 25.40x1.42mm 25.4025.40 1.421.42 347347 1212 Center bevel
09013 Rot.cutting rule 25.40x1.42mm D, curved notched, Ø 290mm, serrated, 12tpi, on coilsRot.cutting rule 25.40x1.42mm 25.4025.40 1.421.42 290290 1212 Center bevel
08090 Rot.cutting rule 26.10x1.42mm D, straight not notched, Clean-Cut, 8tpi, on coilsRot.cutting rule 26.10x1.42mm 26.1026.10 1.421.42 88 Center bevel
08538 Rot.cutting rule 26.10x1.42mm D, curved notched, Ø 487mm, Euro-Cut, 8tpi, on coilsRot.cutting rule 26.10x1.42mm 26.1026.10 1.421.42 487487 88 Center bevel
08626 Rot.cutting rule 26.10x1.42mm D, curved not notched, Ø 487mm, Euro-Cut, 8tpi, on coilsRot.cutting rule 26.10x1.42mm 26.1026.10 1.421.42 487487 88 Center bevel
08627 Rot.cutting rule 26.10x1.42mm D, curved notched, Ø 487mm, serrated, 10tpi, on coilsRot.cutting rule 26.10x1.42mm 26.1026.10 1.421.42 487487 1010 Center bevel
08628 Rot.cutting rule 26.10x1.42mm D, curved not notched, Ø 487mm, serrated, 10tpi, on coilsRot.cutting rule 26.10x1.42mm 26.1026.10 1.421.42 487487 1010 Center bevel
08793 Rot.cutting rule 26.10x1.42mm D, curved not notched, Ø 410mm, Euro-Cut, 8tpi, on coilsRot.cutting rule 26.10x1.42mm 26.1026.10 1.421.42 410410 88 Center bevel
08794 Rot.cutting rule 26.10x1.42mm D, curved not notched, Ø 430mm, Euro-Cut, 8tpi, on coilsRot.cutting rule 26.10x1.42mm 26.1026.10 1.421.42 430430 88 Center bevel
08537 Rot.cutting rule 26.16x1.42mm D, straight not notched, Euro-Cut, 8tpi, on coilsRot.cutting rule 26.16x1.42mm 26.1626.16 1.421.42 88 Center bevel
08453 Rot.cutting rule 26.40x1.42mm D, straight not notched, Euro-Cut, 8tpi, on coilsRot.cutting rule 26.40x1.42mm 26.4026.40 1.421.42 88 Center bevel
08457 Rot.cutting rule 26.40x1.42mm D, curved notched, Ø 487mm, Euro-Cut, 8tpi, CW, on coilsRot.cutting rule 26.40x1.42mm 26.4026.40 1.421.42 487487 88 Center bevel
08465 Rot.cutting rule 26.40x1.42mm D, curved notched, Ø 270mm,Euro-Cut, 8tpi, on coilsRot.cutting rule 26.40x1.42mm 26.4026.40 1.421.42 270270 88 Center bevel
09011 Rot.cutting rule 27.40x1.42mm D, straight not notched, serrated, 10tpi, on coilsRot.cutting rule 27.40x1.42mm 27.4027.40 1.421.42 1010 Center bevel

4pt D4 - Long Center Bevel - coils

Article number Product description Higher height mm Base thickness mm Diameter Rule mm TPI (teeth per inch) Chamfer
10112 Cutting rule 40.00x1.42mm XF-Dieflex hard, G 12 facet bevel on coilsCutting rule 40.00x1.42mm 40.0040.00 1.421.42 without teeth

4pt D4 - Long Center Bevel - meter pieces

Article number Product description
01103M Cutting rule 23.80x1.42mm D4, HF, DF-Dieflex, in meterpieces

4pt E - Side Bevel - coils

Article number Product description Higher height mm Base thickness mm Diameter Rule mm TPI (teeth per inch) Chamfer
08940 Cutting Rule 1,42 X 40,00 MM TDF V e, ACW, in coils, ground packed with oil paperCutting Rule 1,42 X 40,00 MM 40.0040.00 1.421.42 without teeth Side bevel
08216 Rot.cutting rule 24.60x1.42mm E, curved notched, Ø 487mm, serrated, 12tpi, on coilsRot.cutting rule 24.60x1.42mm 24.6024.60 1.421.42 487487 1212 Side bevel

Marbach msoft meter pieces - 440HV

Article number Product description Higher height mm Base thickness mm Diameter Rule mm TPI (teeth per inch) Chamfer
10463M Cutting rule 23.80x0.71mm D, 52°, 440HV, msoft, no edge hardening, in 1m piecesCutting rule 23.80x0.71mm 23.8023.80 0.710.71 without teeth Center bevel

Marbach msoft coils - 44HV

Article number Product description Higher height mm Base thickness mm Diameter Rule mm TPI (teeth per inch) Chamfer
10463 Cutting rule 23.80x0.71mm D, 52°, 440HV, msoft, no edge hardening, ACW on coilsCutting rule 23.80x0.71mm 23.8023.80 0.710.71 without teeth Center bevel

2Pkt. mhard - D - Center Bevel - meter pieces - 390HV/640HV

Article number Product description Higher height mm Base thickness mm Diameter Rule mm TPI (teeth per inch) Chamfer
00985M Cutting rule 23.80x0.71mm D, 52°, 390/640HV, mhard, with edge hardening, in meterpiecesCutting rule 23.80x0.71mm 23.8023.80 0.710.71 without teeth Center bevel

2Pkt. mhard - D - Center Bevel - coils - 390HV/640HV

Article number Product description Higher height mm Base thickness mm Diameter Rule mm TPI (teeth per inch) Chamfer
00985 Cutting Rule 0,71 X 23,80 MM marbach mhard CB 52° S ACW 390 HV/ 640 HV anticlockwise in Rollen á 100mCutting Rule 0,71 X 23,80 MM 23.8023.80 0.710.71 without teeth Center bevel
00333 Cutting rule 23.80x0.71mm D, 52°, 390/640HV, mhard, with edge hardening, CW on coilsCutting rule 23.80x0.71mm 23.8023.80 0.710.71 without teeth Center bevel

3Pkt. mhard - D - Center Bevel - meter pieces - 340HV/640HV

Article number Product description Higher height mm Base thickness mm Diameter Rule mm TPI (teeth per inch) Chamfer
02505M Cutting rule 23.80x1.05mm D, 52°, 340/640HV, mhard, with edge hardening, in 1m piecesCutting rule 23.80x1.05mm 23.8023.80 1.051.05 without teeth Center bevel

3Pkt. mhard - D - Center Bevel - coils - 340HV/640HV

Article number Product description Higher height mm Base thickness mm Diameter Rule mm TPI (teeth per inch) Chamfer
10454 Cutting Rule 1,05 X 23.80 MM marbach mhard, CB, 52°, S ,CW 340 HV/ 640 HV Clockwise coilsCutting Rule 1,05 X 23.80 MM 23.8023.80 1.051.05 without teeth Center bevel
02505 Cutting rule 23.80x1.05mm D, 52°, 340/640HV, mhard, with edge hardening, on coilsCutting rule 23.80x1.05mm 23.8023.80 1.051.05 without teeth Center bevel

2pt mhard - D4 - Long Center Bevel - meter pieces - 390HV/640HV

Article number Product description Higher height mm Base thickness mm Diameter Rule mm TPI (teeth per inch) Chamfer
01045M Cutting rule 23.80 X 0.71mm D4, 52°, 390/640HV, mhard, with edge hardening, in meterpiecesCutting rule 23.80 X 0.71mm 23.8023.80 0.710.71 without teeth Long center bevel

2Pkt. mhard - D4 - doppelseitige Facette - coils - 390HV/640HV

Article number Product description Higher height mm Base thickness mm Diameter Rule mm TPI (teeth per inch) Chamfer
10436 Cutting rule 23,80x0,70mm D4, 52°, 390/640HV, mhard, edge hardened, coilsCutting rule 23,80x0,70mm 23.8023.80 0.710.71 without teeth Long center bevel
01045 Cutting rule 23.80 X 0.71mm D4, 52°, 390/640HV, mhard, with edge hardening, on coilsCutting rule 23.80 X 0.71mm 23.8023.80 0.710.71 without teeth Long center bevel

3Pkt. mhard - D4 - Long Center Bevel - meter pieces - 340HV/640HV

Article number Product description Higher height mm Base thickness mm Diameter Rule mm TPI (teeth per inch) Chamfer
01073M Cutting rule 23.80x1.05mm D4, 52°, 340/640HV, mhard, with edge hardening, in meterpiecesCutting rule 23.80x1.05mm 23.8023.80 1.051.05 without teeth Long center bevel

3Pkt. mhard - D4 - Long Center Bevel - coils - 340HV/640HV

Article number Product description Higher height mm Base thickness mm Diameter Rule mm TPI (teeth per inch) Chamfer
01073 Cutting rule 23.80x1.05mm D4, 52°, 340/640HV, mhard, with edge hardening, on coilsCutting rule 23.80x1.05mm 23.8023.80 1.051.05 without teeth Long center bevel
10453 Schneidlinie 1,05 X 23.80 MM marbach mhard, LCB, 52° S, 340HV/640HV, CW coilsSchneidlinie 1,05 X 23.80 MM 23.8023.80 1.051.05 without teeth Long center bevel

4pt. mhard - D4 - Long Center Bevel - Coils

Article number Product description Higher height mm Base thickness mm Diameter Rule mm TPI (teeth per inch) Chamfer
01123 Cutting Rule 23,80x1,42mm marbach mhard, LBC, 52° S, 340HV/640HV, ACW coilsCutting Rule 23,80x1,42mm 23.8023.80 1.421.42 without teeth Long center bevel

1,5Pkt. mpower - D - Center Bevel - coils - 390HV/640HV

Article number Product description Higher height mm Base thickness mm Diameter Rule mm TPI (teeth per inch) Chamfer
01251 Cutting rule 23.80x0.53mm D, HF, mpower, shaped, on coilsCutting rule 23.80x0.53mm 23.8023.80 0.500.50 without teeth Center bevel

2Pkt. mpower - D - Center Bevel - meter pieces - 390HV/640HV

Article number Product description Higher height mm Base thickness mm Diameter Rule mm TPI (teeth per inch) Chamfer
01212M Cutting rule 23.80x0.71mm marbach mpower CB 52° S, 390 HV/640 HV, in meterpiecesCutting rule 23.80x0.71mm 23.8023.80 0.710.71 without teeth Center bevel

2Pkt. mpower - D - Center Bevel - coils - 390HV/640HV

Article number Product description Higher height mm Base thickness mm Diameter Rule mm TPI (teeth per inch) Chamfer
01976 Cutting rule 23.45x0.71mm D, mpower, on coilsCutting rule 23.45x0.71mm 23.4523.45 0.710.71 without teeth Center bevel
01212 Cutting rule 23.80x0.71mm marbach mpower CB, 52° S, ACW, 390 HV/640 HV, on coilsCutting rule 23.80x0.71mm 23.8023.80 0.710.71 without teeth Center bevel
01969 Cutting rule 23.80x0.71mm marbach mpower D, 52° S, CW, 390 HV/640 HV on coilsCutting rule 23.80x0.71mm 23.8023.80 0.710.71 without teeth Center bevel
01977 Cutting rule 23.80x0.71mm marbach mpower D, 42° S, ACW, 390 HV/640 HV, outerØ 500mm on coilsCutting rule 23.80x0.71mm 23.8023.80 0.710.71 without teeth Center bevel
10086 Cutting rule 23.80x0.71mm marbach mpower D, 52° S ACW, 390 HV/640 HV on coilsCutting rule 23.80x0.71mm 23.8023.80 0.710.71 without teeth Center bevel
01984 Cutting rule 23.80x0.71mm marbach mpower, D, 42° S, CW, 390 HV/640HV, on coilsCutting rule 23.80x0.71mm 23.8023.80 0.710.71 without teeth Center bevel

3Pkt. mpower - D - Center Bevel - coils - 340HV/640HV

Article number Product description Higher height mm Base thickness mm Diameter Rule mm TPI (teeth per inch) Chamfer
01986 Cutting rule 23.80x1.05mm marbach mpower D, 52° S, ACW, 340 HV/640 HV, on coilsCutting rule 23.80x1.05mm 23.8023.80 1.051.05 without teeth Center bevel

3Pkt. mpower - D4 - Long Center Bevel - meter pieces - 340HV/640HV

Article number Product description Higher height mm Base thickness mm Diameter Rule mm TPI (teeth per inch) Chamfer
01252M Cutting rule 23.80x1.05mm marbach mpower D4, 52° S, 340 HV/640 HV, in meterpiecesCutting rule 23.80x1.05mm 23.8023.80 1.051.05 without teeth Long center bevel

3Pkt. mpower - D4 - Long Center Bevel - coils - 340HV/640HV

Article number Product description
01252 Cutting rule 23.80x1.05mm marbach mpower D4,52° S, ACW, 340 HV/640 HV on coils
01978 Cutting rule 23.80x1.05mm marbach mpower D4, 52°, S, CW, 340 HV/640HV, on coils
01987 Cutting rule 23.80x1.05mm marbach mpower D4,52° S, CW, 340 HV/640 HV on coils

4Pkt. mpower - D4 - Long Center Bevel - coils - 340HV/640HV

Article number Product description Higher height mm Base thickness mm Diameter Rule mm TPI (teeth per inch) Chamfer
01253 Cutting rule 23.80x1.42mm marbach mpower LCB 52° S, ACW, 340 HV/640 HV, in coilsCutting rule 23.80x1.42mm 23.8023.80 1.421.42 without teeth Long center bevel

2Pkt. mpower-S - D - Center Bevel - coils - 390HV/700HV

Article number Product description Higher height mm Base thickness mm Diameter Rule mm TPI (teeth per inch) Chamfer
04051 Cutting Rule 23,80x0,71mm mpowerS, CB, 52° S, 390HV/700HV, CW, coilsCutting Rule 23,80x0,71mm 23.8023.80 0.710.71 without teeth Center bevel
10084 Cutting rule 23.80x0.71mm mpowerS -- CB 52° S ACW 390 HV/700HV on coilsCutting rule 23.80x0.71mm 23.8023.80 0.710.71 without teeth Center bevel

3Pkt. mpower-S - D4 - Center Bevel - coils - 340HV/700HV

Article number Product description
10085 Cutting rule 23.80x1.05mm D4, mpower-s, 52° S, ACW, 340 HV/700 HV on coils

Marbach mgold

Article number Product description Higher height mm Base thickness mm Diameter Rule mm TPI (teeth per inch) Chamfer
20011 Cutting rule 23.80x0.71mm D, 42°, 60HRC, mgold, ACW shaved, 340 HV/700HV, on coilsCutting rule 23.80x0.71mm 23.8023.80 0.710.71 without teeth Center bevel
20010 Cutting rule 23.80x0.71mm D, 42°, 55HRC, mgold, ground, ACW, on coilsCutting rule 23.80x0.71mm 23.8023.80 0.710.71 without teeth Center bevel

2Pkt. D - Center Bevel - meter pieces

Article number Product description
01839M Waved rule 23.80x0.71mm, D, H2, 3.5mm serrated edge, in meterpieces
01848M Waved rule 23.80x0.71mm, D, H3x, 5.0mm serrated edge, in meterpieces
01850M Waved rule 23.80x0.71mm, D, H3x, 3.5mm waved edge, in meterpieces
01823M Waved rule 23.80x0.71mm, D, H2, 6.0mm serrated edge, in meterpieces

2pt D - Center Bevel - coils

Article number Product description Higher height mm Base thickness mm Diameter Rule mm TPI (teeth per inch) Chamfer
00791 Waved rule 12.00x0.40mm, D, H2, 5.0mm serrated edge, on coilsWaved rule 12.0012.00 0.400.40

3Pkt. D - Center Bevel - meter pieces

Article number Product description
01824M Waved rule 23.80x1.05mm, D, H2, 6.3mm serrated edge, in meterpieces
01842M Waved rule 23.80x1.05mm, D, H3x, 5.0mm serrated edge, in meterpieces
01843M Waved rule 23.80x1.05mm, D, H2, 3.5mm serrated edge, in meterpieces

3pt D - Center Bevel - coils

Article number Product description Higher height mm Base thickness mm Diameter Rule mm TPI (teeth per inch) Chamfer
01101 Waved rule 23.80x1.05mm, mpower 3.5mm serrated edge, on coilsWaved rule 23.8023.80 1.051.05
01102 Waved rule 23.80x1.05mm, mpower 2.0mm serrated edge, on coilsWaved rule 23.8023.80 1.051.05
01843 Waved rule 23.80x1.05mm, D, H2, 3.5mm serrated edge, on coilsWaved rule 23.8023.80 1.051.05
01162 Waved rule 23,80x1,05mm D4, mpower 5,0mm serrated edge on coilsWaved rule 23,80x1,05mm 23.8023.80 1.051.05